F 250 4WD Super Duty V10-6.8L VIN S (2001)
Rear Door Window Motor: Service and Repair
REMOVAL
1. Remove the window switch.
2. Remove the rear door trim panel and the rear door trim watershield.
3. Remove the door speakers.
4. Tape the window glass in the full up position.
5. Disconnect the window regulator electric drive.
6. Position the connector for the window regulator electric drive inside of the door.
7. Remove the bolts.
8. Separate the window regulator electric drive from the rear door window regulator.
9. Remove the window regulator electric drive from the door.
