F 250 4WD Super Duty V10-6.8L VIN S (2001)
6. Remove the insulator.
Installation
NOTE: Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
1. NOTE: No lubricants of any kind are to be used during body insulator installation.
Follow the removal procedure in reverse order.
Body Support - Rear, Regular Cab, Lower
BODY SUPPORT-REAR, REGULAR CAB, LOWER
Removal
1. Move the front seat forward.
2. Move the front seatback forward.
3. If equipped, remove the utility tray behind the seat.
4. Pull the carpet, or mat back to see the rear body insulator bolt head.
5. Remove and discard the bolt.
