F 250 4WD Super Duty V10-6.8L VIN S (2001)
Air Door Actuator / Motor: Service and Repair
Air Door Actuator / Motor, HVAC
Air Inlet Duct Door Vacuum Control Motor
REMOVAL
1. Remove the air inlet door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the screws.
3
Rotate the vacuum control motor to disengage the lever and remove the air inlet door vacuum control motor.
CAUTION: Do not attempt to bend any part of the lever. It is brittle and will break.
INSTALLATION
1. Follow the removal procedure in reverse order.
Panel/Defrost Door Vacuum Control Motor
REMOVAL
1. Remove the extension duct.
2. Remove the panel/defrost door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the pushnut.
3
Remove the screws.
4
Remove the panel/defrost door vacuum control motor.
