F 250 4WD Super Duty V10-6.8L VIN S (2001)
9. Pull the seal from the A/C compressor.
INSTALLATION
1. Clean the A/C compressor nose area.
CAUTION: Do not allow dirt or other foreign materials to enter the A/C compressor.
2. Place the shaft seal on the special tool. Lubricate the shaft seal and the special tool with PAG oil or equivalent.
3. Position the shaft seal and the special tool over the A/C compressor shaft.
4. Push the shaft seal onto the A/C compressor shaft with the special tool until seated.
