F 250 4WD Super Duty V10-6.8L VIN S (2001)
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
Auxiliary Climate Control
REMOVAL
1. Perform the Refrigerant Discharging and Recovery Procedure.
2. Remove the tube clamp.
3. Disconnect the auxiliary line fitting.
4. Disconnect the condenser to evaporator line from the A/C evaporator core. Refer to spring lock couplings disconnect and connect procedure.
