F 250 4WD Super Duty V10-6.8L VIN S (2001)
Alignment: Service and Repair
Camber and Caster Adjustment
Camber and Caster Adjustment - F-250, F-350 4x4 and F-450, F-550
Special Tool(s)
Special Tools
1. Raise and support the vehicle.
2. Remove the front wheel.
3. Check and note the amount of camber in the current camber adjuster sleeve.
4. Select a new camber adjuster sleeve.
-
The camber change required to obtain the optimum settings must be added or subtracted from the amount of camber in the old or production
camber adjuster sleeve.
-
Use this example as a guide. If the LR wheel camber must be reduced I degree and the existing camber adjuster sleeve has a +0.5 degree of
camber, select the -0.5 degree camber adjuster sleeve.
5. Remove the cotter pin and castellated nut. Discard the cotter pin.
6. Install the nut.
