F 250 4WD Super Duty V10-6.8L VIN S (2001)
4. For the A/C condenser core, add 30 ml (1 ounce) of clean PAG Refrigerant Compressor Oil (R-134a Systems) or equivalent to the A/C condenser
core or the suction accumulator/drier inlet tube.
5. Add 60 ml (2 ounces) of clean PAG Refrigerant Compressor Oil (R-134a Systems) or equivalent to the suction accumulator/drier inlet tube when
carrying out each of the following repairs:
^
installation of a new A/C evaporator core orifice
^
installation of a new A/C compressor pressure relief valve
^
installation of a new refrigerant line
^
repair of an O-ring seal leak
^
repair of a charge port leak
6. Installation of new components that do not require discharge of refrigerant and resulting oil loss, such as the A/C cycling switch and the A/C
pressure transducer, do not require additional oil.
