F 250 4WD Super Duty V10-6.8L VIN S (2001)
12. Remove the nut.
13. Install the nut and tighten to initial torque.
^
Apply Threadlock and Sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G315-A5 (Type II).
14. Install the castellated nut and a new cotter pin.
15. Tighten the nut to final torque.
16. Install the front wheel.
17. Raise and support the vehicle.
18. Recheck the camber measurement. Readjust as necessary.
