F 250 4WD Super Duty V10-6.8L VIN S (2001)
1. Follow the removal procedure in reverse order.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten bolts to specification.
2. Check the restraint system for correct operation.
40/20/40 Seat
REMOVAL
1. Remove the driver passenger seat, as required.
2. Remove the safety belt buckle.
1
Remove the safety belt buckle nut.
2
Remove the safety belt buckle.
NOTE: Driver side shown, passenger side similar.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: Make sure to tighten nuts to specification.
2. Check the restraint system for correct operation.
