F 250 4WD Super Duty V10-6.8L VIN S (2001)
1.
Replace the affected front row seat belt buckle(s). Refer to the service procedures in section 501-20A of the appropriate CD for the vehicle being
serviced, with the following exceptions:
^
Remove both center seat belt bolts and leave the belts attached to the seat during removal.
^
During seat installation, it is not necessary to route the center seat belts through the locating strap since they are still attached to the seat.
Tighten both bolts to 40 Nm (30 lb-ft).
WINDSTAR
1.
Replace the affected front row seat belt buckle(s). Refer to the service procedures in section 501-20A of the appropriate CD for the vehicle being
serviced.
