ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Clutch Switch: > < Recall - Cruise Control Deactivation Switch Overheating|Page 1434
Page 1
background image

Vehicle Speed Sensor: Description and Operation

Vehicle Speed Sensor (VSS)

For F-Series and Excursion, the VSS signal is generated by Generic Electronic Module (GEM). The GEM generates VSS from a speed sensor on the
rear axle.

On vehicles equipped with 4-Wheel Anti-lock Brake Systems (4WABS), the vehicle speed signal is generated by the rear anti-lock brake sensor and sent
to the 4WABS module. The 4WABS module sends the vehicle speed signal via circuit 679 (GY/BK) to all systems that require a vehicle speed signal
input. Vehicles equipped with Rear Anti-lock Brakes (RABS) generate a vehicle speed signal from the rear axle speed sensor. The Generic Electronic
Module (GEM) receives this signal (VSS_GEM) for internal use and then distributes it to the appropriate other users (i.e., the Powertrain Control
Module [PCM], speed control module, and speedometer). On motorhome, the VSS signal is transmitted to the instrument cluster from the powertrain
control module (PCM) through hardwired circuitry.

All Other Service Bulletins for Clutch Switch: > < Recall - Cruise Control Deactivation Switch Overheating|Page 1434