F 250 4WD Super Duty V10-6.8L VIN S (2001)
Refrigerant Pressure Sensor / Switch: Description and Operation
Air Conditioning Cycling Switch PCM Inputs
AIR CONDITIONING CYCLING SWITCH
The Air Conditioning (A/C) cycling switch may be wired to either the A/C Cycling Switch (ACCS) or ACPSW Powertrain Control Module (PCM)
input. When the A/C cycling switch opens, the PCM will turn off the Air Conditioning (A/C) clutch For information on the specific function of the
A/C cycling switch, refer to Heating and Air Conditioning.
The A/C Cycling Switch (ACCS) circuit to the PCM provides a voltage signal which indicates when the A/C is requested. When the A/C demand
switch is turned on, and both the A/C cycling switch and the high pressure contacts of the A/C high pressure switch (if equipped and in circuit) are
closed, voltage is supplied to the ACCS circuit at the PCM. Refer to Vehicle/Diagrams for vehicle specific wiring.
If the ACCS signal is not received by the PCM, the PCM circuit will not allow the A/C to operate. For additional information, refer to PCM outputs,
wide open throttle air conditioning cutoff. See: Powertrain Management/Description and Operation/PCM Outputs
NOTE: Some applications do not have a dedicated (separate) input to the PCM indicating that A/C is requested. This information is received by the
PCM through the BUS + and BUS - Standard Corporate Protocol (SCP) communication.
