F 250 4WD Super Duty V10-6.8L VIN S (2001)
1. Position the main seal onto the axle shaft.
2. Using the special tools and a hammer, seat the main seal onto the axle shaft.
9. Position the axle shaft into the axle housing.
10. Using the special tools and a hammer, install the main seal into the wheel knuckle.
11. Install the wheel hub and bearing. See: Suspension/Wheel Hub/Service and Repair
12. Install the front brake disc. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair