F 250 4WD Super Duty V10-6.8L VIN S (2001)
Pitman Arm: Service and Repair
Sector Shaft Arm - F-250, F-350, F-450, F-550
Special Tool(s)
Special Tool(s)
Removal
NOTE: Replace the steering gear sector shaft arm if it is bent. If the steering gear sector shaft arm is bent, check remainder of the steering linkage
system for signs of damage. Replace any damaged steering linkage parts as required. Do not attempt to straighten the steering gear sector shaft arm or
any other steering linkage components.
1. Position and lock the wheels in the straight-forward position. Raise and support the vehicle.
2. Remove the cotter pin and castellated nut. Discard the cotter pin.
3. Disconnect the steering sector shaft arm drag link. Position the steering sector shaft arm drag link out of the way.
-
Use the Steering Arm Remover.
