F 250 4WD Super Duty V10-6.8L VIN S (2001)
Steering Wheel: Service and Repair
Wheel - Super Duty
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Turn the steering wheel to the straight-ahead position and turn the ignition switch to the OFF position.
2. Disconnect the battery ground cable(s) to allow the depletion of the restraint system backup power supply.
3. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions and notes in the deactivation
procedure.
Deactivate the Supplemental Restraints System (SRS).
4. Remove the driver air bag module.
5. Remove and discard the steering wheel retaining bolt.
6. CAUTION: Removing the steering wheel without using a puller can damage the column bearings.