F 250 4WD Super Duty V10-6.8L VIN S (2001)
37. CAUTION: Clean the differential housing cover mounting surfaces with a suitable solvent, to remove all traces of oil film or foreign material.
NOTE: The differential housing cover requires the use of silicone sealant material rather than a gasket.
NOTE: Install the differential housing cover within 15 minutes of applying the silicone material.
Apply the specified bead of Clear Silicone Rubber Sealer F7AZ-I9554-CA or equivalent meeting Ford specifications ESB-M4G92-A or
ESE-M4Gl95-A as shown.
38. CAUTION: Allow one hour curing time before filling the axle with lubricant.
NOTE: Place two cover bolts into the differential housing cover at the 2 o'clock and 8 o'clock positions. This will help to position the differential
housing cover onto the differential housing.
Install the differential housing cover.
39. Install the axle assembly.
40. Install the axle shaft assemblies and the front wheel hubs.
41. Fill the axle with the specified type and quantity of lubricant.
