F 250 4WD Super Duty V10-6.8L VIN S (2001)
8. Remove the brake hose junction block from the rear axle housing and let it hang.
9. Remove the brake lines from the rear axle housing but not from the disc brake calipers and let the tubing hang.
10. Remove the disc brake calipers from the rear disc brake rotors and wire them aside.
11. WARNING: Strap the axle securely to the jack.
Use a suitable transmission jack to support the axle.
12. Remove the lower shock absorber nuts and bolts.
13. NOTE: Once the rear spring plate nuts and bolts are removed, they must be replaced.
Remove the rear spring plate U-bolts and nuts.
14. Lower the axle from the vehicle.
Installation
