F 250 4WD Super Duty V10-6.8L VIN S (2001)
3. Position the detent plate locating pin in the unused threaded hole in the transmission case.
1
For vehicles with a gasoline engine and manual transmission, or a diesel engine and manual or automatic transmission, position the pin in the
rearward (RH) threaded hole in the transmission case.
2
For vehicles with a gasoline engine and automatic transmission, position the pin in the forward (LH) threaded hole in the transmission case.
4. CAUTION: Verify that the control rod is still attached correctly to the transfer case.
CAUTION: Verify that the transfer case is still in 2H.
Connect the control rod to the lower shifter arm.
5. Hold the transfer case control lever assembly and tighten the bolt.
6. Lower the vehicle.
7. Position the shift lever with the bezel and boot assembly and install the bolt.
