F 250 4WD Super Duty V10-6.8L VIN S (2001)
Wiper Arm: Service and Repair
Wiper Pivot Arm - Rear
REMOVAL
1. Lift the rear wiper pivot arm cover.
CAUTION: Use care to protect the vehicle paint finish when carrying out this procedure or possible damage may occur.
2. Remove the rear wiper pivot arm.
1
Remove the nut.
2
Remove the rear wiper pivot arm.
3
Disconnect the rear window washer hose.
INSTALLATION
1. Operate the rear window wiper motor to the park position.
1
Turn key to RUN position.
2
Turn the rear window wiper switch to the INT 1 position.
3
Allow the rear window wiper motor to operate for at least one cycle.
4
Turn the rear window wiper switch to the OFF position.