F 250 4WD Super Duty V10-6.8L VIN V (2005)
Center Link: Service and Repair
Drag Link - Inner
Drag Link - Inner, F-250, F-350, 4X4, and F-450, F-550
Special Tool(s)
Removal and Installation
NOTE: Replace the drag link if the ball stud is loose in the socket or the drag link is bent. Replace the steering linkage stud dust seal if any nicks,
cuts, or tears are present. Do not attempt to straighten steering linkage components.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Loosen the 2 adjusting sleeve nuts.
3. Loosen the adjusting sleeve bracket nut.
