F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal and Installation
1. Remove the rear seat.
2. Pull the rear door opening weatherstrips away from the B-pillar trim panel.
3. Remove the scuff plate.
4. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Use the Seat Belt Bolt Bit to remove the bolt.
