F 250 4WD Super Duty V10-6.8L VIN Y (2006)
1. Remove the scuff plate.
2. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Use the Seat Belt Bolt Bit to remove the bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3
Remove the shoulder safety belt guide.
3. Pull the rear door opening weatherstrips away from the C-pillar trim panel.
4. If equipped, remove the utility trays and jack assembly.
