F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Vacuum Brake Booster: Description and Operation
Brake Booster - Vacuum
The vacuum-type power brake booster:
^
is a dual diaphragm, vacuum-assisted power brake booster.
^
reduces brake pedal force.
^
is located on the LH side of the bulkhead in the engine compartment, between the brake pedal and the brake master cylinder.
^
is divided into separate chambers by the diaphragms.
^
will not operate if the vacuum is restricted or if any of the vacuum-related power brake components fall.
^
is installed as an assembly.
If the power assist fails, the brake system continues to operate with increased brake pedal effort.
Hose and Check Valve
The power brake booster check valve:
^
is located on the front of the power brake booster.
^
is installed separately (install a new grommet when installing a new check valve).
^
is positioned between the power brake booster and the power brake booster hose.
^
closes when the engine is turned off.
^
in the closed position, traps engine vacuum in the power brake booster.
^
retains vacuum to provide a power assisted brake application with the engine off.
