F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Trailer Brake Control Module: Service and Repair
Trailer Brake Control (TBC) Module
Trailer Brake Control (TBC) Module
Removal
NOTE: If the manual control lever knob is missing, a separate service part is available, the entire module does not need to be replaced.
1. Remove the instrument panel center finish panel. For additional information, refer to Dash Board.
2. CAUTION: Do not use any tools to remove the trailer brake control module. If tools are used, damage to the module may result.
Press down on the tab and push the trailer brake control (TBC) module part-way out of the instrument panel.
