F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Thermostat Bypass Hose: Service and Repair
Bypass Tube
Material
Removal and Installation
1. Remove the intake manifold.
2. Remove the 3 bolts, the bypass tube, and discard the bypass tube gaskets.
^
To install, tighten to 10 Nm (89 inch lbs.).
3. To install, reverse the removal procedure.
^
Inspect the mating surfaces and clean the sealing surfaces with metal surface prep and silicone gasket remover. Follow the directions on the
packaging.
^
Install new bypass tube gaskets.
