F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Both camshafts
15. CAUTION: The crankshaft cannot be moved past the 6 o'clock position once set.
Rotate the crankshaft clockwise, as viewed from the front, positioning the crankshaft damper spoke at the 6 o'clock position and the timing mark
indentation at the 7 o'clock position.
RH camshaft
16. CAUTION: Engine is not freewheeling. Camshaft procedure must be followed exactly or damage to valves and pistons will result.
CAUTION: The Timing Chain Wedge tool must be installed square to the timing chain and the engine block.
NOTE: Front cover removed for clarity.
Install the special tool in the RH timing chain as shown.
