F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Engine Mount: Service and Repair
Engine Mounts
Special Tool(s)
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the battery ground cable. For additional information, refer to Battery.
3. Remove the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
4. Remove the throttle body spacer. For additional information, refer to Fuel Delivery and Air Induction.
5. Remove the generator. For additional information, refer to Alternator.
6. Remove the cooling fan shroud. For additional information, refer to Cooling System.
