F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Headlamp Dimmer Switch: Service and Repair
Steering Column Multifunction Switch
Removal and Installation
1. Depower the supplemental restraint system (SRS).
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key into the lock cylinder and turn the ignition switch to the RUN position.
2
Push the ignition switch lock cylinder release tab with a punch while pulling out the ignition switch lock cylinder.
3. If equipped, twist the tilt wheel handle and remove it.
4. Remove the screws and the steering column shrouds.
5. Remove the screws and the multi-function switch.
