F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Headlamp Switch: Service and Repair
HEADLAMP SWITCH
Removal and Installation
1. Position the steering wheel in the lowest position.
2. Carefully pull out the instrument cluster finish panel enough to gain access to the back of the headlamp switch.
3. NOTE: Feel for flat surfaces on the headlamp switch and push the switch outward until the headlamp switch pops out.
Reach behind the instrument cluster finish panel and release the headlamp switch from the instrument cluster finish panel.
-
Disconnect the electrical connectors.
4. To install, reverse the removal procedure.