F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Alignment: Service and Repair
Toe Adjustment
Toe Adjustment - F-250, F-350, 4x4 and F-450, F-550
1. Using alignment equipment and the manufacturer's instructions, measure the toe settings.
^
Refer to Alignment Specifications in the Specifications portion for optimal alignment settings.
^
If the toe settings are not within specification, go to the next step.
2. Start the engine and center the steering wheel.
3. Turn the engine off and, using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position.
4. Loosen the tie-rod adjuster sleeve nuts.
5. Rotate the center link to the correct toe setting.
6. Make sure that the RH tie-rod end is not misaligned, as shown in image B. Adjust the position as necessary as shown in image A.
7. Tighten the tie-rod adjuster sleeve nuts to 55 Nm (41 ft. lbs.).
8. Verify the toe settings and adjust as necessary.
