F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Fluid - Transfer Case: Service and Repair
Transfer Case Draining and Filling
1. Position a suitable container under the transfer case.
2. Remove the drain plug and drain the transfer case.
3. CAUTION: If the correct fill procedures are not followed, a transfer case failure can result.
NOTE: Fluid level must be just below the fill plug.
Remove the fill plug from the rear of the transfer case and fill the transfer case with the specified fluid.
^
If the fluid is below the level, fill with MERCON(R) Multi-Purpose Automatic Transmission Fluid XT-2-QDX or MERCON(R) equivalent.
4. CAUTION: Do not use air tools.
Tighten the drain and fill plugs to specification.
^
Tighten to 27 Nm (20 ft. lbs.).