F 250 4WD Super Duty V10-6.8L VIN Y (2006)
8. Disconnect the pressure cutoff switch electrical connector.
4x4 vehicles
9. Loosen the A/C manifold and tube bolt and remove the manifold and tube assembly.
-
To install, tighten to 21 Nm (15 lb-ft).
-
Discard the O-ring seals.
4x2 vehicles
10. Loosen the A/C manifold and tube bolt and remove the manifold and tube assembly.
-
To install, tighten to 21 Nm (15 lb-ft).
11. Remove the pressure cutoff/dual function pressure switch.
