F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Engine Control Module: Service and Repair
Removal and Installation
POWERTRAIN CONTROL MODULE (PCM)
Special Tool(s)
Special Tool(s)
Removal and Installation
1. NOTE: Refer to Computers and Control Systems for correct worldwide diagnostic system (WDS) hook-up procedure.
If servicing the powertrain control module (PCM), connect the diagnostic tool to the vehicle. Allow the diagnostic tool to identify the vehicle and
obtain configuration data.
-
All programmable module information will automatically be retrieved by the WDS.
2. Disconnect the battery ground cable.
3. Disconnect the PCM electrical connectors.
