F 250 4WD Super Duty V10-6.8L VIN Y (2006)
3
Slide the seat backrest trim panel down, releasing the upper retainers and remove the seat backrest trim panel.
8. Release the seat backrest trim cover J-clips.
9. NOTE: The inboard and outboard tower cap covers are not interchangeable.
Remove the inboard, outboard and front tower cap screw covers. Remove the 4 tower cap attachment screws.
10. NOTE: Observe the retainer bracket orientation.
Remove the screws and the bracket.
11. Using an appropriate pry tool, separate and remove the outer and front safety belt web guides.
1
Using a pin-type retainer removal tool, release the 2 pin-type retainers for the web guide.
2
Remove the front safety belt web guide.