F 250 4WD Super Duty V10-6.8L VIN Y (2006)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor - Front
Wheel Speed Sensor - Front, 4x4
Wheel Speed Sensor - Front, 4X4
Removal and Installation
1. Remove the front disc brake rotor shield.
2. Disconnect the front wheel speed sensor electrical connector.
3. Remove the 4 wheel speed sensor harness retainers.
CAUTION: Make sure the ABS harness is properly routed to prevent the disc from cutting the ABS harness.
4. Remove the screw and the front wheel speed sensor.
^
To install, tighten to 18 Nm (13 ft. lbs.).
5. To install, reverse the removal procedure.