F 250 4WD Super Duty V10-6.8L VIN Y (2006)
4x2 vehicles
4. NOTE: Prior to removing the speed sensor, make sure that the area around the sensor is free of foreign material to prevent contamination of the
transmission.
Remove the Output Shaft Speed (OSS) sensor.
1
Remove the bolt.
2
Remove the Output Shaft Speed (OSS) sensor.
Installation
4x4 vehicles
1. Install the Output Shaft Speed (OSS) sensor.
1
Lubricate the O-ring and install the Output Shaft Speed (OSS) sensor.
2
Install the bolt. Tighten to 9 Nm (80 lb-in).
4x2 vehicles
2. Install the Output Shaft Speed (OSS) sensor.
1
Lubricate the O-ring and install the Output Shaft Speed (OSS) sensor.
2
Install the bolt. Tighten to 9 Nm (80 lb-in).
All vehicles
