F 250 4WD Super Duty V10-6.8L VIN Y (2006)
1. NOTE: It is necessary to move the A/C condenser toward the front of the vehicle to install the auxiliary transmission fluid OTA cooler.
Install the auxiliary transmission fluid OTA cooler and the bolts.
^
Tighten to 8 Nm (71 inch lbs.).
2. Install the RH lower A/C condenser bracket.
^
Tighten to 8 Nm (71 inch lbs.).
3. Install the LH lower A/C condenser bracket.
^
Tighten to 8 Nm (71 inch lbs.).
4. Connect the RH auxiliary transmission fluid OTA cooler hose.
