F 250 4WD Super Duty V10-6.8L VIN Y (2006)
13. Install the RH upper auxiliary transmission fluid OTA cooler bolts.
^
Tighten to 8 Nm (71 inch lbs.).
14. Install the LH upper auxiliary transmission fluid OTA cooler bolts.
^
Tighten to 8 Nm (71 inch lbs.).
15. Install the grille into the 4 lower retaining clips.
16. Install the 4 upper grille screws.
17. CAUTION: Use only MERCON(R) SP Transmission Fluid to service the TorqShift transmissions. Mixing MERCON(R) or MERCON(R) V in a
TorqShift transmission may cause transmission damage. Use of any fluid other than the recommended fluid can cause transmission damage.
Fill the transmission with clean automatic transmission fluid.