F 250 4WD Super Duty V10-6.8L VIN Y (2006)
5. Mark the pinion flange in relation to the drive pinion stem to make sure alignment is correct during installation.
6. Using the special tool, remove the pinion flange.
7. Force up on the metal flange of the rear axle drive pinion seal. Install gripping pliers to the seal flange and strike with a hammer until the rear axle
drive pinion seal is removed.
Installation
1. Lubricate the new pinion seal with clean premium long-life grease.
2. CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and replace it
with a new seal.
Using the special tool, install a new rear axle drive pinion seal.
