F 250 4WD Super Duty V10-6.8L VIN Y (2006)
find the position that shows minimum vibration. If 2 adjacent positions show equal improvement, position the clamp head between them.
3. If the vibration persists, add a second clamp at the same position and recheck for vibration.
4. If no improvement is noted, rotate the clamps in opposite directions, equal distances from the best position determined in Step 2. Separate the
clamp heads about 13 mm (1/2 in) and recheck for vibration at the road speed.
5. Repeat the process with increasing separation until the best combination is found or the vibration is reduced to an acceptable level.
