F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
5. Insert a flat-bladed screwdriver into the heated seat module bracket and release the locking tab.
6. Remove heated seat module.
INSTALLATION
WARNING: To reduce the risk of serious injury, read and follow all warnings, cautions and notes at the beginning of the removal procedure.
1. Install the heated seat module in the mounting bracket. Verify that the locking tab is correctly seated.
2. Attach the heated seat module electrical connector.
3. Install the seat in the vehicle.
4. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS).
5. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).
6. Check the active restraints for correct operation.
