F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Seat Latch: Service and Repair
Front Bench
SEAT LATCH - FRONT BENCH
REMOVAL
1. Remove the seat backrest.
2. Remove side release handle.
-
Push clip out of slot and remove handle.
3. Roll seat back trim cover to expose seat latch bolts.
-
Release lower J-clip and uncover upper seat latch attachment bolts.
4. Remove the two bolts and remove the front seat latch.
INSTALLATION
1. To install, reverse the removal procedure.
Second Row, Right Side
SEAT LATCH - SECOND ROW, RIGHT SIDE
REMOVAL
1. Remove the seat backrest.
2. Remove the seat handle clip and handle.
3. Unclip the J-clips and position upholstery to gain access to the seat backrest linkage rod.