F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
5. Remove the two screws securing the lumbar adjustor control to the seat track riser.
-
Push lumbar adjuster control inward to provide clearance for trim panel removal.
Heated seats
6. Disconnect the heated seat switch electrical connector.
7. Pull the rearward lower corner of the side shield to disengage the metal retaining clip.
8. CAUTION: Bend the side shield slightly to make sure the shield is not scratched by the recliner lever.
Remove side shield cover.
Power seats
9. Disconnect the seat control switch electrical connector.
All seats
10. Remove the seat cushion assembly.
11. Remove the seat backrest assembly.
Manual seats