F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
2. Install the rear anti-lock brake sensor.
1. NOTE: Do not apply force to the plastic rear anti-lock brake sensor connector. Position the rear anti-lock brake sensor and install the rear
anti-lock brake sensor bolt.
2. Connect the electrical connector.
3. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
Connect the battery ground cable.
