F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
2. NOTE: Tighten the bolts in two stages.
Tighten the bolts in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 inch lbs.).
^
Stage 2: Tighten to 10 Nm (89 inch lbs.).
3. If necessary, install the fuel injector supply manifold.
^
Position the fuel injection supply manifold.
^
Install the seven bolts.
4. Position the water thermostat and housing.
