F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Compressor Fitting HVAC: Service and Repair
With Auxiliary Climate Control
Compressor Manifold and Tube Assembly
REMOVAL
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
1. Recover the refrigerant.
2. Remove the lug wrench.
3. Disconnect the manifold and tube fitting at the suction accumulator/drier.
4. Remove the tube clamp.
5. Remove the pin-type retainers and the sight shield.