F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Compass: Adjustments
Compass Zone Adjustment
COMPASS ZONE ADJUSTMENT
Compass Calibration Zones
1. The zone setting is factory set to Zone 8. Check the Compass Calibration Zone map to verify the correct compass zone setting for your geographic
location.
2. Gently press both buttons for three to four seconds until ZONE is displayed.
3. Release the switches. Zone and the current zone setting will be displayed.
4. Press either switch to cycle through all possible zone settings. Stop cycling when the correct zone setting for your location is displayed.
5. Release the switch to exit the zone setting mode. After five seconds of no button activity, the module will store the current zone and leave the
mode.
