F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
1. Discharge and recover the refrigerant. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant Discharging and Recovery
Procedure, See: Heating and Air Conditioning/Service and Repair/Refrigerant Discharging and Recovery Procedure
2. Remove the right-hand fender splash shield.
3. Remove the rear right-hand wheel.
4. At the rear of the vehicle, disconnect the evaporator outlet line spring lock coupling.
5. Remove the five line bracket retaining nuts.
6. Remove the five line brackets by inserting a screwdriver in the stud hole and twisting.
CAUTION: Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
