F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
13. Remove the safety belt retractor.
1
Remove the bolt
2
Remove the safety belt retractor through the back of the seat.
^
Route out the safety belt, guide, tongue and anchor.
NOTE:
^
If reusing the safety belt retractor, do not allow safety belt to completely recoil back into the retractor.
^
Safety belt retractors are specific to LH or RH seats and are not interchangeable.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
All seats
1. Route the safety belt anchor, tongue, web guide and safety belt up through the opening at the safety belt guide.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
2. Install the safety belt retractor.
1
Align the tab into the seat backrest bracket.
2
Install the bolt.
