F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
1. To install, reverse the removal procedure.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten bolts to specification.
^
Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not remain
closed, install a new shoulder safety belt guide.
2. Check the restraint system for correct operation.
Crewcab
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
